I realize this is more of a router bit application, but I know somebody here in this wealth of knowledge has some idea of where to find this tool.

I need a tool that will take the edge off of my acrylic panels with approximately 1/32" or slightly less radius, and it needs to have a pilot head to keep the depth consistent. I have a 1/16" tool that will do this but the radius is too large for the look I'm trying to achieve.

Here's an example of a German tool that would work, but I'm hoping to find one a bit more affordable than this:Radius Entgratfräser 1,0 mm Ø 6 mm VHM mit Führungskugellager | eBay

It's for a 1mm radius, and that would be fine too, as well as a .75mm radius.

Any leads?

Thanks.