502,912 active members
7,137 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2015
    Posts
    1

    Duplomatic Turret does not lock in on start up- Colchester Tornado 200 Lathe

    On Start up of the machine the turret just continues to rotate....no lock in position activated ?

    Any advice please

  2. #2
    Junior Member
    Join Date
    Aug 2018
    Posts
    4
    Hi.

    I see that you have a Colchester Tornado 200 and I need your help.

    It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?

    Thank you very much

Similar Threads

  1. Duplomatic Turret Issues - Colchester 3000L
    By ricka in forum Colchester Tornado lathes
    Replies: 2
    Last Post: 03-10-2016, 08:01 PM
  2. Duplomatic turret will not lock in
    By jjcastro in forum Colchester Tornado lathes
    Replies: 0
    Last Post: 02-28-2014, 03:06 AM
  3. Tornado 100 Duplomatic turret and parameter problem
    By bezelchuck in forum Colchester Tornado lathes
    Replies: 0
    Last Post: 12-29-2013, 10:23 PM
  4. Tornado 300 w/Duplomatic Turret Unclamp Alarm
    By tp176 in forum Colchester Tornado lathes
    Replies: 4
    Last Post: 01-26-2011, 05:56 AM
  5. Tornado 300 Duplomatic Turret
    By yarpo in forum Colchester Tornado lathes
    Replies: 4
    Last Post: 11-13-2009, 01:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •