[curiosity22]

Hey G'day people,

Just wondering if anyone would care to shoot me a working profile for a Gecko G540 please.

I have a three axis unit with A as slave. Just having some difficulties setting up and would like a profile to compare.


Cheers,
Steve

[vmax549]

I do not have one BUT if you take the Gecko Mach3 XML that they provide and IMPORT it into the UCcnc it should give you all the basics.

Just a thought, (;-) TP

[curiosity22]

I do not have one BUT if you take the Gecko Mach3 XML that they provide and IMPORT it into the UCcnc it should give you all the basics.

Just a thought, (;-) TP

Hey Vmax g'day,

Thank you for taking the time to post. I did do that mate, its a simple enough process one would think, create a profile name - stick it on the desktop - import the mach3 xml and should be good to go. BUT. there's always a but.. I get this error doing a dry run.

“a machine axis software limit was reached – the axis was now stopped”

And for the life of me I can not see what the issue is.. I know what its saying just don't know how to problem solve it.

So I thought maybe compare between what I have and someone else has.

Cheers,

Steve

[ger21]

Go to the individual axis pages under Configuration, and see what the softlimit settings are.

[curiosity22]

ger21 g'day,

Thank you for your post, yup gone there found the culprit..

Cheers,
Steve