Hi,
Anybody has 3 axis/or more heidenhain postprocesor for nx cam?
Hi,
Anybody has 3 axis/or more heidenhain postprocesor for nx cam?
Many of the sample ISV machines in your installation have Heidenhain postprocessors. I suggest you look at those, and choose one closest to what you want, and use it as a starting point in Post Builder.
For example, look at the in and mm versions in Program Files\Siemens\NX 10.0\MACH\resource\library\machine\installed_machi nes\sim01_mill_3ax\postprocessor\heidenhainTNC\
Mark Rief
Siemens PLM
Hello
I do custom post processors. Maybe I can help?
Marek
Hello Marek,
Do you have or Can you help me build post processor for bridgeport tnc 370? using nx
thank you
Hi
Write to me for more information.
[email protected]
Hello,
I have a working DMG DMU200P MILLPLUS post for a 5-axis Non-orthogonal machine that DMG builds.Would this be of any interest to you?
...
...
..
.
Hello
Anybody has 3 axis Heidenhain 355/360 postprocesor for nx cam?
Mika
Hi
I have written a postprocessor for my 3 axis CINCINNATI FTV 840. It has Heidenhain iTNC 530. It might be working also on 355/360.
[email protected]
Hello
I’m looking for postprocessor heidenhain TNC 430 3 axis 5 axis positioning and 5 axis simultaneously for UG NX.
Thank you
hi
I’m looking for postprocessor heidenhain TNC 530 for UG NX
thanx
[email protected]
I’m looking for postprocessor heidenhain TNC 530 for UG NX pleasce msg
tnax
hi
every body,I’m looking for postprocessor heidenhain TNC 530 for master cam 2018/2019/2020,my machine is table-table.
and I hove siemens 840d 5axis post for UG NX10, if enyone haven't, we can Exchange it.my e-mail:[email protected],think you!