Hey all,
I operate a MultiCam 3000. We are using it to cut quarter inch DiBond. Does anyone know of a way to eliminate the burrs and semi sharp lip left over from cutting? I just want to reduce the amount of sanding needed after cutting.
Thread: Eliminating Burr on CNC Router
Results 1 to 2 of 2
-
08-19-2015, 09:01 PM #1
Registered
- Join Date
- Jul 2015
- Posts
- 9
Eliminating Burr on CNC Router
-
08-20-2015, 12:41 AM #2
Member
- Join Date
- Jul 2014
- Posts
- 35
Re: Eliminating Burr on CNC Router
On wood, I preemptively chamfer the outline. This lets me use an upcut end mill. There's also downcut, compression, whicj might help, although, I don't think they make compression for 1/4" thickness.
cosmos-industrial.com Pen Marking Tools and CNC Drag Knife
Reply With QuoteSimilar Threads
-
Can I get better burr free cut out on plastic/acrylic with router than mill
By Smokey911 in forum Commercial CNC Wood RoutersReplies: 9Last Post: 12-21-2012, 04:09 PM -
Eliminating X,Y in G02/G03
By Haas user in forum PTC Pro/ManufactureReplies: 0Last Post: 03-08-2011, 04:46 PM -
eliminating vibrations
By turpija in forum Mechanical Calculations/Engineering DesignReplies: 101Last Post: 10-24-2007, 04:56 AM -
Eliminating Backlash 101
By BobWarfield in forum Uncategorised MetalWorking MachinesReplies: 5Last Post: 09-30-2006, 12:04 AM -
Eliminating Pockets
By robinsoncr in forum Rhino 3DReplies: 4Last Post: 06-27-2006, 05:21 PM
Tags for this Thread
Posting Permissions
