Hello Forum,
Installed a couple of DRO axes to measure repositioning of machine parts during setup. Having a problem to zero the Reference Zero display since there is no homing routine. First thing this morning when doing <Shift> <Reset> after changing an unrelated parameter the display did zero (in the wrong position), but not since. So is there a procedure to it thanks, couldn't find a mention in the literature. regards,
Results 1 to 2 of 2
-
09-14-2015, 11:31 PM #1
Member
- Join Date
- Mar 2006
- Posts
- 34
8055 Initialise DRO axis position
-
09-16-2015, 08:40 AM #2
Member
- Join Date
- Mar 2006
- Posts
- 34
Re: 8055 Initialise DRO axis position
Hello Forum,
Answer to DRO axis zeroing thanks to High Technology Control in Sydney. Axis parameter P31 DECINPUT home switch used for referencing = NO, Axis parameter P32 REFPULSE home signal polarity = -. Select axis for referencing and Cycle Start. Axis thinks it has homed and instantly resets Reference Zero display to zero! regards,
Reply With QuoteSimilar Threads
-
Fagor 8055 MC - Axis files ALX,ALY,ALZ need
By popiciro in forum Fagor AutomationReplies: 0Last Post: 06-10-2015, 02:55 PM -
Mach3 stopped, board doesn't initialise.
By jimini in forum Machines running Mach SoftwareReplies: 0Last Post: 12-20-2013, 06:39 PM -
Z axis height as a function of Y-axis position..
By bo.gardmark in forum PCB millingReplies: 1Last Post: 06-07-2012, 07:55 AM -
8055 axis board error 2012
By pazdersk in forum Fagor AutomationReplies: 2Last Post: 06-12-2009, 09:36 PM
Tags for this Thread
Posting Permissions
