Hey,

In before thanks to anyone who puts his time in this.

I have a kinda weird problem. On Mori Seiki nh5000.Mid work mori just stopped working after pallet B did a 180 degree rotation.Working time goes on but nothing moves ( no alarms).
If i block pallet B(with program that does nothing) and just work with pallet A everythingˇs fine.I checked program and everything its like it was before (when it was still fine).
Checked all the sensors under the table, clamp, unclamp, arm down, arm up (both pallets are using the same sensors) and it looks ok.
Pallet sits fine and in mdi mode i manage to run it thru the whole cyclus just fine.The problem starts in automatic mode when pallet B does a 180 degree rotation.

Thanks in advance.