[cchan_ADSK]

Curious if anyone has tested this out.

I believe every Tormach comes with a 1-year subscription of Fusion 360 as well. The new 440 is looking very attractive from a price standpoint.

http://www.tormach.com/software-post-processor.html

[cbyrd]

I have been using Fusion 360 with PP on the PCNC 1100 and the post that come with fusion is working good. The Lathe post us a different story, but it is still a beta post.

It is really nice to make a drawing change and the cam updates it.

[ormandj]

Agreed, the post is working just fine for me with the 1100 + PP. I'm definitely enjoying Fusion 360's integrated CAM.

[scott216]

Here's a link to Tormach's post processor page: Post Processor Files for Tormach PathPilot
There's a Fusion Post processor from July. I used diffchecker.com to compare the generic one that comes with Fusion to the one on Tormach's site. You can see the differences here:
https://www.diffchecker.com/y2x69ybd

Fusion generic is on the left, Tormach July is on the right.