I have been reading post all night and most of today. I have located a package to upgrade my taig mill to cnc. It contained the gecko 540 power supply and 3 stepper motors. It was around $650. I can't find it again to save my life. Any help would be greatly appreciated in location this package or something similar.
Thanks Tom
Thread: newbie help
Results 1 to 2 of 2
-
10-18-2015, 10:56 PM #1
Registered
- Join Date
- Nov 2012
- Posts
- 1
newbie help
-
10-19-2015, 08:06 AM #2
Gold Member
- Join Date
- Feb 2007
- Posts
- 4553
CNC Router Parts has a three axis package for $539
Tom,
CNC Router Parts has a three axis stepper package for $539, see attached link:
3-Axis DIY Nema 23 Electronics Kit | CNCRouterParts
Soigeneris has the Taig stepper coupler kit for $109
Taig Stepper Coupler Kit - Soigeneris.com
Total cost approximately $650.00 not including shipping.
Jeff...Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.
Reply With QuoteSimilar Threads
-
Need some Newbie Help
By DonHrehor in forum Commercial CNC Wood RoutersReplies: 3Last Post: 10-22-2013, 12:43 PM -
another newbie, another need help Q.
By charlie1 in forum Want To Buy...Need help!Replies: 0Last Post: 11-01-2011, 10:40 PM -
NX4 Newbie
By ou812 in forum UG NXReplies: 6Last Post: 11-19-2009, 06:28 PM -
CNC newbie
By mrclockman in forum Community Club HouseReplies: 2Last Post: 04-25-2009, 11:26 PM -
Newbie help
By Soundstorm in forum Benchtop MachinesReplies: 0Last Post: 02-07-2007, 11:10 AM
Tags for this Thread
Posting Permissions
