586,785 active members*
2,848 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Tapping speed and feed for verticle

Thread: Tapping speed and feed for verticle

Results 1 to 2 of 2
  1. 10-19-2015, 01:34 PM #1
    Jimmy Lee
    Jimmy Lee is offline Registered
    Join Date
    Sep 2015
    Posts
    2

    Lightbulb Tapping speed and feed for verticle

    G84 tap cycle for 1" - 8 tap. Speed and feed ?
    Reply With Quote Reply With Quote
  2. 10-19-2015, 07:11 PM #2
    sinha_nsit
    sinha_nsit is offline Registered
    Join Date
    Feb 2006
    Posts
    1792

    Re: Tapping speed and feed for verticle

    Choose feed per revolution mode, and specify F = Pitch (lead) in G84.
    Use floating tap holder if not using rigid tapping.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Machine treats feed as rapid after tapping
    By MGA01 in forum Sharp CNC
    Replies: 2
    Last Post: 07-01-2017, 05:48 AM
  2. 15XT tapping problems-feed rate varies
    By etpm in forum Fadal
    Replies: 2
    Last Post: 09-22-2015, 04:39 PM
  3. feed and speed for high speed
    By Darth Yoda in forum BobCad-Cam
    Replies: 2
    Last Post: 12-05-2012, 05:14 PM
  4. Tapping feed rate issue with V24
    By dingo0722 in forum BobCad-Cam
    Replies: 5
    Last Post: 01-22-2011, 10:03 PM
  5. rigi tapping feed speed equasion?
    By stuby in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 10-13-2008, 09:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules