545,673 active members*
1,888 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Feb 2006
    Posts
    211

    Mori Seiki MV40 with Fanuc OM-C

    Mori Seiki MV40 equipped with Fanuc OM-C 30 TOOL ATC
    It was working perfectly yesterday, today as i started this machine, it's op stop & Auto power off LED lits.
    I have checked Optional stop & Auto power off push buttons it is in OFF position.
    Mode selection is OK but MAG start rotating in Manual mode without pressing MAG Index PB.
    I went thru it's drawing and found that Mori Seiki used Custom made PCB (M022) in operator panel I/O's to Fanuc I/O card.
    I suspected mori seiki custom card M022 as it's using operator panel interface.
    Kindly somebody help me out from this problem.
    How do i test this card M022 in machine?

  2. #2
    Registered
    Join Date
    Feb 2006
    Posts
    211

    Re: Mori Seiki MV40 with Fanuc OM-C

    Problem resolved, as Mori Seiki M022 card was faulty.
    Now machine is in working order after repair of M022 card.

Similar Threads

  1. MORI SEIKI MV40
    By simke55 in forum Mori Seiki Mills
    Replies: 1
    Last Post: 04-12-2017, 07:50 PM
  2. 1987 Mori Seiki MV40 circuit diagrams and manuals Yasnac MX3
    By ross33912 in forum Mori Seiki Mills
    Replies: 4
    Last Post: 01-01-2015, 09:13 AM
  3. Replies: 8
    Last Post: 09-25-2014, 02:58 PM
  4. Ladder Diagram for Mori Seiki MV40/Fanuc 6M-B
    By Randy K in forum Mori Seiki Mills
    Replies: 1
    Last Post: 03-06-2012, 11:21 AM
  5. Mori mv40 24v troubleshoot
    By toolwrite in forum Mori Seiki Mills
    Replies: 2
    Last Post: 03-06-2010, 12:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •