Hy, please for lb3000, i need variable to read compensation radius on X and Z axis, event if they are the same.:drowning:
Hy, please for lb3000, i need variable to read compensation radius on X and Z axis, event if they are the same.:drowning:
Try these
VNSRX X-axis nose radius compensation amount VNSRX[12] = 0.020
VNSRZ Z-axis nose radius compensation amount VNSRZ[12] = 0.020
hello, thx 4 answer ... please, i need it a bit different
For example, if i have in code T020202, i dont want to call vnsrx[02], but simple vnsrx ...
So, i need to read the radius compensation for the tool that is active, without pointing to that tool again.
T020202
...
do something with vnsrx[02]
i change after a while the tool, so i will need to modify the program in 2 places :
T030303 ( modify )
...
do something with vnsrx[03] ( modify )
i would like to modify only the tool, so to make only one modification :
T030303 ( modify )
...
do something with vnsrx - should work automatically for the active tool
maybe is possible ....
VATOL is the tool currently in the spindle, so how about:
VNSRX[VATOL]
hi, vatol is not working ... i have osp-p300L ...
Sorry, my bad... turning centers use VETLN rather than VATOL.
k, i'll try it tomorow ... also, vatol should work on mills ?
VATOL is the tool number that is currently in the spindle on mills... a word of caution, VATOL contains the tool number from the most-recently completed tool change. 99% of the time, that should be the tool currently in the spindle.
thank you, it worked
* what case is 1% ?
Glad it worked!
If the power drops out during a tool change, then the variable may still contain the previous tool number, and of course, manually changing a tool.
thank you