Is there a program out there that can change the g-code written for one machine into g-code for a different machine. I have an AXYZ router A2MC with ATC and I want to use Fusion 360 but it doesn't have a post processor for my machine.
Is there a program out there that can change the g-code written for one machine into g-code for a different machine. I have an AXYZ router A2MC with ATC and I want to use Fusion 360 but it doesn't have a post processor for my machine.
It had been so many years away from the bussiness, so I'm not sure. If you willing to pay i'm sure someone will take a look at this. However, it's not that hard to translate g-code for one machine to other. I don't remember exactly but back then I used Microsoft Word to make modification, it call "macro record and play" you just have to record the note one, next time you just hit play it will make all necessary change in seconds.
The best way to learn is trial error.
Can you post some of the code that Fusion 360 will output and some code that works on your machine? I could maybe customize something for a fee if you're interested.
Here's a very powerful option in KipwareXC®.
KipwareXC -User configurable CNC G Code Conversion Software from Kentech Inc.
Completely user configurable and you can build as many different Profiles as required to convert between multiple formats for multiple machines if required.
It can be used very effectively as a "post" alternative.