[JLT]

A little late but I built a Router Table from Joe's eDrawings back in march. It turned out so well that my son wanted one also so I built another one of them. We are having so much fun with them that I mised the summer season all together, or was there no summer this year? Been working on utililty drawers for it and a rack of 14 tools with automatic tool changer. This is working out real good.

I wan't to thank Joe for his time and generosity of his design.

Here are some photos of the build. I will post more photos (the drawers and changer etc) later.

[JLT]

Here are some more photos.

[JLT]

I can access from eather side.

[HayTay]

Verrrrry nicely done! Love those sliding drawers. I can't wait for the toolchanger pics. Any plans or other information to go along with the toolchanger?

Great build, thank you for sharing.

[JLT]

Changer:

Having trouble with uploading video.

[Switcher]

Great machine!

I'm very interested in your toolchanger, looks like it mounts on the router? Is that correct?

You could zip your video up, & just post here as a zipped file.

Nice work!

.

[JLT]

Video short clip:

The Quick change tool holder was patterned after
http://www.hightechsystemsllc.com/in...s/Page1446.htm
I have one of these for my Mini Mill but they didn't have one for a 1/2" so I just made one out of AL with a 1/2" shaft to fit the router.

They only had 5 sizes of tool holders so I had to make them also.

The tool rack was made with the router out of corian.

[slink]

CAN I GET MORE INFO AND DRAWINGS ON THE MAKING OF YOUR SPINDLE AND TOOL CHANGER
[email protected]

[Switcher]

WOW!!

That is Cool!

Thanks for the video, & the link.


Do you run Mach3?

.

[JLT]

I run Turbocnc and use Sheetcam. It was easy to modify the post for sheetcam to accommodate the changer.

[Jason Marsha]

Very impressive JLT, thanks for posting.

Jason

[ger21]

Everyone's been waiting for years for an inexpensive ATC, and you're already using one. Nice. Very Nice.

[DayneInfo]

JLT - Very nice setup you have there. So here is the big question (at least for me) Interested in selling a tool changer setup?

Dwayne

[JLT]

JLT - Very nice setup you have there. So here is the big question (at least for me) Interested in selling a tool changer setup?

Dwayne

Never really thought of it as this is just a hobby. Still tweeking things.

[Switcher]

JLT,

I really like that ATC.

I was looking at the site you posted http://www.hightechsystemsllc.com/index.htm , I understand how the tool (endmill, etc...) keeps from slipping in the holders, with a small set screw.

How does the holder keep from slipping (rotating), in the actual toolchanger? The toolchanger does not look like it would provide enough clamping preasure to keep the tool holder from slipping, I don't see any type of flat on the toolholder to give a positive stop. I may be wrong, I'm just really interested in that product (toolchanger).

It looks like you have a great setup going on in that video!

Any chance of a longer video, with some cutting and maybe a couple of toolchanges?

Also did you see the "Drill Chuck Holder" they have? http://www.hightechsystemsllc.com/in...es/Page513.htm

Thanks for sharing your cool project.





.

[JLT]

JLT,

I really like that ATC.

I was looking at the site you posted http://www.hightechsystemsllc.com/index.htm , I understand how the tool (endmill, etc...) keeps from slipping in the holders, with a small set screw.

How does the holder keep from slipping (rotating), in the actual toolchanger? The toolchanger does not look like it would provide enough clamping preasure to keep the tool holder from slipping, I don't see any type of flat on the toolholder to give a positive stop. I may be wrong, I'm just really interested in that product (toolchanger).

It looks like you have a great setup going on in that video!

Any chance of a longer video, with some cutting and maybe a couple of toolchanges?

Also did you see the "Drill Chuck Holder" they have? http://www.hightechsystemsllc.com/in...es/Page513.htm

Thanks for sharing your cool project.




.

Working on a longer video.
Didn't see the Drill Chuck. Thanks

[JLT]

JLT,

I really like that ATC.

I was looking at the site you posted http://www.hightechsystemsllc.com/index.htm , I understand how the tool (endmill, etc...) keeps from slipping in the holders, with a small set screw.

How does the holder keep from slipping (rotating), in the actual toolchanger? The toolchanger does not look like it would provide enough clamping preasure to keep the tool holder from slipping, I don't see any type of flat on the toolholder to give a positive stop. I may be wrong, I'm just really interested in that product (toolchanger).

It looks like you have a great setup going on in that video!

Any chance of a longer video, with some cutting and maybe a couple of toolchanges?

Also did you see the "Drill Chuck Holder" they have? http://www.hightechsystemsllc.com/in...es/Page513.htm

Thanks for sharing your cool project.





.

Working on a longer video.
Didn't see the Drill Chuck. Thanks

[bp092]

Wow I'm blown away. Your router looks cool and colossal in some of the pics. The automatic tool changer & video is extremely impressive. Joe should be thrilled when he sees it. One question, I'm assuming when you change tools in production, for two different kinds of cuts you would include that in the gcode. Assuming that it's running, makes it's passes, pulls back to the tool dock and shuts off before or during. But how does your router know when the spindle on your hitachi has fully stopped before it can release that bit and grab a new one or do you just set a certain amount of time? Thanks!

[Greolt]

That toolchanger looks cool.
Can't help wondering how the red part and spring handles 30,000 rpm and the fact that the tool is extended a long way from the collet.

Have you accidently run the gantry into a drawer yet

[joecnc2006]

Ok, I am VERY Imperseed, I love what you have done with the machine, from the drawer slides, cable carrier's, Tool Changer, and the top cover over bearings., you have to get me info on the tool changer... lol

This is what I love about this community, people taking things and helping others, and improving the DIY and allowing the average peoson to have so much fun.

You got to love it.