I have 3/8 aluminum bars that need bent. Here is a pic of what I need. Now don't get confused, that larger part is just a base. The base is a completely different part. Now there is a damper that I put on the "S" bar. The "S" bar is all I need.
Results 1 to 5 of 5
-
12-10-2006, 07:29 PM #1
Registered
- Join Date
- Sep 2006
- Posts
- 27
Looking for someone to bend parts!
-
12-11-2006, 01:42 PM #2
Registered
- Join Date
- Aug 2006
- Posts
- 36
I can do without marking please provide info.
Thanks
Jeff Barton
Qmf solutions
1-336-996-5570
-
02-01-2007, 11:19 PM #3
Registered
- Join Date
- May 2006
- Posts
- 27
Do you have a print of the part? How many, do you supply mat. or do I, what kind of turn over time do I have? Need more info.
-
02-21-2007, 03:05 AM #4
Registered
- Join Date
- May 2006
- Posts
- 27
Can you educate me on how you can bend that without marking it? Want to learn all I can.
-
02-21-2007, 04:03 AM #5
Registered
- Join Date
- Jul 2004
- Posts
- 601
If it's 3/8 just buy a roller bender. I've used my 1/2" swagelok bender to make horse shoes out of cold roll steel, so the 3/8 will bend solid aluminum with ease. These benders aren't cheap (couple hundred bucks) but are well worth it.
http://www.swagelok.com/search/produ...part=MS-HTB-6TOn all equipment there are 2 levers...
Lever "A", and Lever F'in "B"
Reply With Quote
Posting Permissions
