Hi Guys,
I'm glueing an anodized aluminum component to a stainless steel part and have success using JB weld, are there better solutions I should be aware of?
Thanks in advance,
Michael
Hi Guys,
I'm glueing an anodized aluminum component to a stainless steel part and have success using JB weld, are there better solutions I should be aware of?
Thanks in advance,
Michael
Thats what I would do.
If it's critical gluing, 3M is contacted for advice and product, they are always helpful and their product is top shelf.
Ken
Just make sure the finish is very rough and the area is as large as possible.
I agree with Mr. Shea. 3M makes some awesome urethane adhesives that I have used to join aluminum.