[1320feet]

I just purchased a 98 Mori SV500. It has bt40 claws and all my tooling is ct40. I would like to trade with anyone who needs bt40 claws. Or purchase some. Or build my own. Also what other machines are interchangeable?
Attachment 298858

[blkaplan]

Have you tried getting them via Mori?

[underthetire]

MV40A,B, MVJr, SV50/500, NV5000, M300, FM1,FM2,SV40/400 dura vertical 5080/5100, NVX 40/4000, NVX 5000, NVX 6000 and I'm pretty sure SH40,SH400, and NH4000. Those things are big money from Mori, and I sold all the extra I had.

Sent from my A3-A20FHD using Tapatalk

[blkaplan]

MV40A,B, MVJr, SV50/500, NV5000, M300, FM1,FM2,SV40/400 dura vertical 5080/5100, NVX 40/4000, NVX 5000, NVX 6000 and I'm pretty sure SH40,SH400, and NH4000. Those things are big money from Mori, and I sold all the extra I had.

Sent from my A3-A20FHD using Tapatalk

Is there anything that tricky about them? Any reason someone couldn't machine a new set of claws w/ their own mori?

[underthetire]

Not too tricky, except maybe the angle for the v flange. At ~800 a piece, might be worth making a few.

Sent from my A3-A20FHD using Tapatalk

[1320feet]

Is there anything that tricky about them? Any reason someone couldn't machine a new set of claws w/ their own mori?

I ended up making my own set. I ran them on my old machine ( AWEA AV1000 ) as that was easier than changing all the tools by hand on the mori.

[1320feet]

MV40A,B, MVJr, SV50/500, NV5000, M300, FM1,FM2,SV40/400 dura vertical 5080/5100, NVX 40/4000, NVX 5000, NVX 6000 and I'm pretty sure SH40,SH400, and NH4000. Those things are big money from Mori, and I sold all the extra I had.

Sent from my A3-A20FHD using Tapatalk

Thanks for the interchange Underthetire. I had no luck finding a used pair, and for what its worth I was quoted $762.00 each from Ellision. I ended up building my own.

[underthetire]

Keep that program! I can sell a few a year....

Sent from my A3-A20FHD using Tapatalk