LOKING FOR CABLE MAKEUP AND SETTINGS FOR COMMUNICATION TO AND FROM PC
I WOULD BE GRATEFUL FOR ANY HELP
Results 1 to 7 of 7
-
12-30-2006, 03:57 AM #1
Registered
- Join Date
- Dec 2006
- Posts
- 116
Slant 3/ Fanuc 11te Rs232 Info???????
-
12-30-2006, 04:24 AM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
12-30-2006, 11:49 PM #3
Registered
- Join Date
- Dec 2006
- Posts
- 116
Not using NCnet using Mastercam do the settings still apply?
Thanx
-
12-30-2006, 11:54 PM #4
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Yes, I would use the 3 wire cable with the Hardware HS jumpered.
Make sure both ends have the same protocol.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
12-31-2006, 12:01 AM #5
Registered
- Join Date
- Dec 2006
- Posts
- 116
Thankx I'll give it a try Tuesday.
When you say "protocol" do you mean (baud,parity,data and start bits etc.....
-
12-31-2006, 12:22 AM #6
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24223
Yes.
Originally Posted by metlshpr
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
12-31-2006, 12:28 AM #7
Registered
- Join Date
- Dec 2006
- Posts
- 116
Great thanks
Reply With Quote
Posting Permissions
