Hi,
I have observed the problem of tool mis pocketing on most of the VMCs.
Also tool pot falling problems also occur occasionaly.
But was unable trace the cause. Can anybody help me on this...
Hi,
I have observed the problem of tool mis pocketing on most of the VMCs.
Also tool pot falling problems also occur occasionaly.
But was unable trace the cause. Can anybody help me on this...
what m/c and what controller and what is the sequence of events when it happen
this mis pocketing I have observed on some VMC, Fanuc 18iMB controlled.
Randomly some day the tool is mis pocketed. Physically it takes the next tool and does the operation of thetool selected in program. This causes accident on fixture.