[Bob La Londe]

I am looking for a 62mm diameter body 110V 24K rpm spindle as a spare for one of my machines.

I can find 65mm, but I want a 62mm so all I have to do is swap the spindle when it starts to go bad. It will go bad. I put a lot of hours on it.

I can only find old no-longer available listings for 62mm/110V spindles. In 62mm the only current ones I am finding are 220V.

Also, does anybody know of a domestic source (USA) even for the 62mm 220V spindles? I'd swap VFD if I could swap out spindles faster and easier.

[Bob La Londe]

I never found one. I did find a 62mm spindle that would fit in my application, but it was 220. I didn't want to rewire a bunch of the machine so or tie up another 220 break in my rather small panel, so instead I installed a Hitachi 110V in 220V out VFD. The combination cost me a lot more than I wanted or thought it should have, but I got the machine back in service. Its happily turning large pieces of aluminum into small pieces of aluminum right now.