I just picked up a Bridgeport series 2 for a support mill and I am curious as to the tool holders this thing takes, Below is a picture of it.
I have read A couple different thing and I am still trying to track down a manual.....
I just picked up a Bridgeport series 2 for a support mill and I am curious as to the tool holders this thing takes, Below is a picture of it.
I have read A couple different thing and I am still trying to track down a manual.....
That appears to be QC40 a 40 taper of the NMTB40 that has a slightly different diam on the flange. I have a Series 1CNC and it uses the QC30.
(;-) TP
Great thanks for the information I will order a couple up to try