Help ID Higbee thread
I have made programs, on FANUC control machines, for external threads with blunt starts.
Now I am running into issues of the tool not escaping fast enough to avoid clipping the following thread as it exits the cut.
Here are 2 program examples I have attempted without success.
ex.1 M22 chmfer off
...
G71 X3.678 Z-2.98 I0 B0 D.009 H.09 F.0833 M32 M75 M22
...
ex.2 M23 chamfer on
...
G71 X3.678 Z-2.98 I0 B0 D.009 H.09 L.1 F.0833 M32 M75 M23
...
Any suggestions are appreciated
OSP700L control
I'm just a butcher masquerading as a machinist