Hey guys. I've been reading the forums here for several months now, but I haven't made many posts. I currently have a CNC router from www.cncconversionkit.com, but it uses supported linear rods and I'm not all that enchanted with it. I have decided to design and build my own machine. After several days of designing in Fusion 360, This is what I have so far. I think it's kind of a cross between a CNC router and mill. So I'm calling it the CNC RouterMill (clever right?). I still have some serious design work to do, but I'm getting there. The table measures 48" wide by 28" deep. I should have about 10" of Z axis travel when it's done. The outer extrusions are 80/20 15 Series 1545-Black (1.5"x4.5"). The table consists of (16) 80/20 15 Series 3075-Black (3.0"x0.75"). The linear rails are Hiwin HGR25 (25mm). The linear bearings are Hiwin HGH25 (25mm). The left/right gantry plates and supporting pieces are 3/4" aluminum plate. Let me know what you guys think of this so far. Thanks!

Justin