Hello,
Gcode for part is ok.
but where to set the tool diametre ? And where i can set tol position ?
Theres are only few options to set.
my cnc -
Hello,
Gcode for part is ok.
but where to set the tool diametre ? And where i can set tol position ?
Theres are only few options to set.
my cnc -
(gcode runs whit no tool compensation).
My tool (8mm cutter) should be out off part , now its going on centre :/
Can help some one
You probably need to do the offset in your .dxf file.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
I have lot of drawings, it takes time to remake all of them. Is dxf2gcode program that god but dont have off set function ?
I've never used it, but usually simple .dxf to g-code converters don't have any offset functions. They just convert the lines to g-code exactly as they were drawn.
Sounds like you need a real CAM program.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
thank you for help!
the solution is to make offset in solidworks and remake gcode. (i will try it next monday on cnc whit mdf )
But some times i plan to make 3d furniture, like dors whit wawes or lines somthing like that. So i have alphacam but mach3 drops a lot of bad lines in gcode and stop at first lines..
i allways get this mesage, and canot try to simulate suting ?:/
Hello,
for 3D engrawing you have to create user define tool.
1. Create geometry define tool
2. Goto Machine - Define tool - User defined.
3. Select geometry which define tool
Or select User tool which is in a default database after instalation .
Alphacam post and VBA macros, Autodesk HSM post.
www.cadcam-softcz.cz
thank you very much.
still learning, but part as photo i was uploaded, it cut perfect.
Deleting some lines in gcode, and it works perfectly. I will cut someting nice, and upload photo
You can define your own user tool or use the existing tools in the tools library of the software.