Re: Fusion 360 post processing
Originally Posted by
SCzEngrgGroup
Scott,
I haven't looked at that POST in years, so I don't recall why I would've done anything....
Regards,
Ray L.
Ok, no prob... Thanks for your help.
One other odd thing is happening... In the following code generated from the post, the line G00 X[ #105 ] Y[ #106 ] is causing mach3 to just pause on that line till I hit cycle start. That isnt the desired result is it? Seems like it should just move X and Y to zero and continue.
(Toolchange Start)
G53 G00 Z0.0000
G00 X[ #105 ] Y[ #106 ]
G49
M05
M09
(Tool #21, 2.5in. 45-Degree Insert Face Mill)
(TOOL/MILL,2.5000,0.0000,0.1250)
G43 H21
(USR, Load Tool #21, 2.5in. 45-Degree Insert Face Mill)
M06 T21
Instructional Videos for CNC Guitar Building
http://www.rmgvideos.com