Seems its been gradually getting noisier, but not really noticed as the spindle is typically just running CW. Tapping yesterday, found its a lot quieter when running CCW. Im guessing spindle bearings? Anyone had any experience changing those out? Source on where to pick them up?
Thread: Partner 5 noisy spindle, only CW
Results 1 to 3 of 3
-
01-14-2016, 04:31 PM #1
Registered
- Join Date
- Dec 2007
- Posts
- 126
Partner 5 noisy spindle, only CW
-
01-15-2016, 03:14 PM #2
Registered
- Join Date
- Sep 2010
- Posts
- 529
Re: Partner 5 noisy spindle, only CW
Put a new belt on it first. When I first resurrected my machine I thought a new set of bearings were going to be required as it had a lot of weird noises and ticking. Put a new drive belt on and no more noises. It might save you a lot of work and expense.
-
01-27-2016, 12:35 AM #3
Registered
- Join Date
- Jul 2010
- Posts
- 548
Re: Partner 5 noisy spindle, only CW
Brian, PM for a reasonable source for the bearings
Sportybob
Reply With QuoteSimilar Threads
-
TL-2 Noisy Spindle
By Geof in forum Haas LathesReplies: 9Last Post: 04-15-2013, 11:01 PM -
SX3 Spindle Bearings Noisy.
By SDesigns in forum Syil ProductsReplies: 31Last Post: 02-02-2013, 09:44 PM -
Noisy lathe spindle! Heeeeeelp Please!
By LX Kid in forum Shopmaster/ShoptaskReplies: 11Last Post: 04-09-2011, 11:52 PM -
noisy spindle belt
By samu in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 08-17-2009, 10:37 PM -
Noisy EMC Spindle ?
By northwestfab in forum FadalReplies: 7Last Post: 09-20-2007, 02:56 AM
Tags for this Thread
Posting Permissions
