[DJNPHOTO]

Looking for a Laser technician to help me fix my machine
Just received my 2nd bulb from Reci company and I am running a Leetro MPC6585 Hardware laser cut 6.1 need help getting my machine up and running I live in Watertown Wisconsin this machine is from china and the company is SHANDONG LINTIANZHIYUAN CNC EQUIPMENT CO LTD had I am not getting Any support on this, the power supply is good and have power to everything. I have X and Y movement but my Z doesn’t work when I push the Z axis the controller just freezes up and have to reboot the laser. I will pay for the help and I will charge the laser company for this as this is their fault.
You can get a hold of me thru Facebook or my email at [email protected] or [email protected]

[Nolan Yang]

Hi, so your problem is the z axis don't move, right?
please check the z axis motor whether work or not? the light is flash or not?

[Bigbird48]

aNd if you think your going to charge the company that sold you the laser think again. You can't even get them to help with the problem.