Hello All,
I am very new to CNC and just started retrofitting a custom system. I am using the following software:
CAD: Alibre Design Expert 9.1 (SP1)
CAM: SprutCam 4.0 (Build 1.25 for Alibre Design)
NC: Mach3
SprutCam 4.0 is included in the Alibre Design Expert package, so naturally, I would like to use SprutCam to generate all G-code. This leads me to the "one-million-dollar" question:
Is there a Mach3 post processor for SprutCam 4.0?