Originally Posted by
alain aleman
Hi guys, somebody knows how configurated mcx to send a program on my HAAS lathe?, i try a lot of times but i can´t do that.
Thank you for your time.
Alain
You have to have the correct Communication settings such as Baud Rate, Comm Port, Data Bits, Parity, etc. This information will be in your HAAS Manual.
Do you have a Floppy or RS232 Cable?
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com