Hi all,
I was wondering ifsomeone could help me,
Im toying with the ideaof completely changing how we program a Hapfo 7000 Lathe as I am currentlytrying to figure out how to use its dated CAD/CAM and was hoping we could use amore modern package,
I’ve spent some timegoogling but im not entirely sure anything will have the functionality we need,
Theidea is, create a DXF of the design required, load the DXF into a CAM packagewhich can create the g-code required.
The issue is that the cutter has the ability to be in 3 differentpositions (Swivel Left, Swivel Centre and Swivel Right) of which I have theG-Code, but can this be input into a CAM package to make this more userfriendly? as the idea at the moment isto teach a number of people how to use this machine.
The code is as follows
M65 P1 (TOOL RIGHT)
M64 P0
M65 P0 (TOOL LEFT)
M64 P1
M65 P0 (TOOL CENTRE)
M65 P1
An example of thesecodes being used within a program:
G90.1 (Absolutedistance mode for arc)
G61 (Exact Path moderemoves tool compensation)
M65 P2 (spindel on/Zoff)
G00 X 426.817Y45
G01 X 426.817Y55.642F3000
G01 X 426.817Y45.642F1200
G01 X 431.352Y25.926F600
G01 X 442.787Y24.349
G01 X 457.573Y20.406
G01 X 480.246Y16.265
M65 P1 (TOOL RIGHT)
M64 P0
G01 X 455.915Y5.803F600
G03 X434.176Y22.5I434.176J0
M65 P0 (TOOL CENTRE)
M65 P1
G01 X -2.585Y22.5F600
M65 P0 (TOOL LEFT)
M64 P1
G01 X -1.571Y17.7F600
G01 X 0Y17.7
G01 X 50Y17.7
G01 X 50Y22.467
G00 X 50Y45
M65 P0 (TOOL CENTRE)
M65 P1
G00 X 426.817Y45F600
M65 P0 (TOOL CENTRE)
M65 P1
M02
If anyone could help itwould be very much appreciated,