Originally Posted by
plasmaMac
Try linking the line segments before you export it out of plasmacam's software by using the the "link Segments" function found with the program
If you are using DesignEDGE there is button on the top tool bar. One of the great things about designedge is that you have the ability to export it as post processor in g-code that you can bring directly into the control software on most router tables.
If you are running the out dated 3.11 software, as far as I can remember, you'll be able to link the line segments and export as solid paths in a DXF format.
Good Luck Brother!
JAG