I have a Deckel FP3NC machine with burned servo amplifier boards. CNC works, but when I press the green button with a lightning symbol (trying to turn it on), pc goes reboot. Here is a video.
It's in RussianSo - when I say something there - it's a command for assistent to press this button
It does not matter, if X50-X53 are pluggid in or not.
If I plug-off a X74:2 - pc don't reboot, but if I plug it in, when ON button was already pressed and K7 and K17 are in ON state, it reboots immideatly. Well, I think that it is reboot, but I'm not shure. Nedded help, because I have not any manuals, exept electric scheme and mechanical spare parts catalog
Results 1 to 2 of 2
-
02-03-2016, 01:52 PM #1
Registered
- Join Date
- Nov 2010
- Posts
- 4
FP3NC - bosch PC rebooting when pressing "ON" button
-
02-04-2016, 07:29 PM #2
Registered
- Join Date
- Nov 2010
- Posts
- 4
Re: FP3NC - bosch PC rebooting when pressing "ON" button
Solved.
Reply With QuoteSimilar Threads
-
Controls locks when I Push the "list Prog" button
By Mikenman in forum Haas MillsReplies: 13Last Post: 04-13-2015, 06:32 PM -
Pressing "Enter" Makes Cycle Start on Mach3
By Sekocan in forum Mach Software (ArtSoft software)Replies: 0Last Post: 05-14-2014, 03:55 PM -
X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
By DaDaDaddio in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-06-2013, 09:59 AM -
Proper dowel pin pressing..."how to" for this job?
By FFWD in forum MetalWork DiscussionReplies: 10Last Post: 01-07-2013, 01:27 AM -
"INPUT BUTTON NOT FUNCTIONAL IN PROGRAM MODE"
By offroadxx in forum FanucReplies: 0Last Post: 03-26-2008, 12:56 PM
Tags for this Thread
Posting Permissions
