Hi All,

I have 4 waterjet machines, 2 Waterjet Sweden and 2 Bystronic. The waterjet sweden machines both have Fanuc controls on them, but I have a problem with one of the waterjet sweden machines. We experienced a powercut which blew one of the controllers. We had it fixed at a local PLC repair centre, but unfortunately we lost all parameters and settings etc in the controller. We do not have a backup of these settings for the machine in question, so basically we have a dead machine. I have tried Waterjet Sweden, and Fanuc to see if we can get a copy of these files but no joy. We would gladly pay for the files if any body has a copy. The machine is a Waterjet Sweden NC2715 (although size is irrelevant) it has a Fanuc 18i m controller on it. Twin heads but on a single beam. If anybody can help it would be greatly appreciated. Obviously UK based would be better.

Thanks Mark