Im a lathe newbie. Im trying to get my MX8 to post for an Okuma lathe with osp-p200 controller.
Any help would be greatly appreciated.
Im a lathe newbie. Im trying to get my MX8 to post for an Okuma lathe with osp-p200 controller.
Any help would be greatly appreciated.
DO you have a post processor
What machine model? Big difference if you have sub, 2 turrets, milling, or Y-axis.
Best regards,
Experience is what you get just after you needed it.
its an Okuma Genos L300E-M
and it has C capability , no second turret or Y drive
I currently do not have a post processor for that Machine, but I have the generic MX8 pp