586,069 active members*
3,446 visitors online*
Register for free
Login

Thread: X Y variation laser cut

Results 1 to 3 of 3
  1. 02-11-2016, 10:31 AM #1
    toons666
    toons666 is offline Registered
    Join Date
    Jan 2014
    Posts
    7

    Question X Y variation laser cut

    Hello !
    I ve this trouble on our lasercut machine (chinese 50x30cm) with RDWorks software...
    there is some little variation on x and y when cutting diagonal, or circle path....


    Attachment 307560

    We dont know where it come from (we tried to setup a different microstep parametter without many change...)
    It seems some speed are worst than some other, (maybe a resonance thing..., and we suspect electricity problem (miss a capacitor somewhere.. maybe...)

    Any help would be great !!!!!!
    Reply With Quote Reply With Quote
  2. 02-11-2016, 02:45 PM #2
    fixtureman1
    fixtureman1 is offline Registered
    Join Date
    Jan 2008
    Posts
    940

    Re: X Y variation laser cut

    Check your belts it looks like one is loose
    Reply With Quote Reply With Quote
  3. 02-12-2016, 02:45 AM #3
    rodrigomartins
    rodrigomartins is offline Registered
    Join Date
    May 2015
    Posts
    53

    Re: X Y variation laser cut

    Hold a pencil in head laser, tape the sheets in plywood and have cut a square with the laser turned off ...
    So if the design display these errors you can be sure that the problem is on track or belts ...
    If you do not present the problem may be the laser tube or lens that is loose inside the head ....
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. *HELP* Variation of board thickness across pcb *HELP*
    By chunsiang in forum PCB milling
    Replies: 2
    Last Post: 07-21-2013, 09:51 PM
  2. SIZE VARIATION ON OKUMA LATHE
    By Al Polidoro in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 04-27-2012, 02:36 PM
  3. TL-1 SSV (spindle speed variation)
    By xyzcnc in forum Haas Lathes
    Replies: 5
    Last Post: 07-25-2007, 05:48 AM
  4. How to modify HPLG file to compensate for the speed variation of my laser engraver ?
    By g1zmo in forum Laser Engraving / Cutting Machine General Topics
    Replies: 0
    Last Post: 05-10-2007, 04:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules