[ronfroim]

Hi everyone,
i work with alphacam ultimate router on a 3 axis cnc router machine, the type that cuts plates. i never done full 3d milling , which is what i need to do now. i need help generating the tool pathes for two parts.
here is link to the parts in 3 different formats. i will appreciate if screen record will be done so i will learn how to do it in case i will have to do it again or will need to tweak something before cutting.
tolearnces are not an issue, it could be +_0.1mm.
Thanks
Ron

[Maroslav4]

Hello,

let me know on PM:

Marek

[ronfroim]

Thanks for the help,Marek. it was a more complex milling than i expected and you response professionally and quick, you also gave great guidance and for how to do thisin the future by myself