I fried the spindle driver board on my NM-145 and would like to get up and running again ASAP. Anyone out there that retrofitted their mill willing to part with one? This is the small daughter board that mounts to the spindle power board.
Eric
Results 1 to 10 of 10
Threaded View
-
02-20-2016, 06:05 PM #1
Registered
- Join Date
- Feb 2010
- Posts
- 371
Looking for a spindle driver board NM-145
Reply With QuoteSimilar Threads
-
G0704 stock spindle control board to mach 3 via C32 board.
By ballistic42 in forum Benchtop MachinesReplies: 13Last Post: 09-22-2016, 02:47 AM -
Help deciding which breakout board or driver board etc to use!
By localbroadcast in forum Servo Motors / DrivesReplies: 7Last Post: 06-09-2016, 09:25 PM -
Home switch for CNC 3020T- with a Spindle Control Board, JP-382A and JP-1482 Board
By Terrynf in forum PCB millingReplies: 0Last Post: 11-30-2014, 05:16 AM -
Replacing TB6560 driver board's driver chip. Is it possible?
By Moodaguda in forum CNC Machine Related ElectronicsReplies: 4Last Post: 08-07-2013, 09:02 AM -
different version spindle driver board
By david_geng in forum Syil ProductsReplies: 3Last Post: 09-07-2007, 12:08 AM
Tags for this Thread
Posting Permissions
