Originally Posted by
zcar2043
Hello guys, I have a UC100 and I keep getting the sync error several times, I am new to all this cnc, and I really dont know a lot of stuff about codes and settings . But I found out that this error happened only when the spindle is running. I found online that the uc100 is better to keep it away from the cnc control box ( chinese machine 6040 in my case). Once the spindle is running I start having the error. One of those times when I was trying to figure out the problem, I noticed the keyboard lights from CAPS and NUM LOCK blinked. And is when the error happened. So I set my machine to zero disconnect the usb keyboard and a usb memory stick And no problems so far. Im trying to get an old keyboard and mouse to test that way. Im using Windows 7 professional 64.
Any ideas
Thanks
Sorry for my English
Sent from my SM-N920P using Tapatalk