Kflop with KStep & Konnect Boards: PWM ?
Tom,
If I use a Kflop with KStep and 2 Konnect Boards... the KStep will run a 3 axis Robot. 4th Step Drive not used.
Can I use the 8 Step outputs from JP5 to run 8 DC motors PWM; to the A-M-C PWM drives for DC motors... AZBDC10A4 Drives? These are not coordinated
motion, only used for speed control and independent PWM to the DC Motors. Special Dispensing Motors.
Thanks so much,
Robot & Machine Design - BLUECNC4, GreenCNC3, RedCNC2L, SilverCNC2; CNC Software!
www.truemachinedesign.com - - - - - - - - - - - - - www.truemachineautomation.com