[Don18P]

We had a live tool seize up last night.
I had to remove the tool from the turret so I could index it, now the live tool motor is out of orientation.
The drive key is off by 90 degrees.

Can anyone tell me how to reset the orientation of the live tool drive motor?

Thanks
Don

[dhardt]

We had a live tool seize up last night.
I had to remove the tool from the turret so I could index it, now the live tool motor is out of orientation.
The drive key is off by 90 degrees.

Can anyone tell me how to reset the orientation of the live tool drive motor?

Thanks
Don

If it is the older style, where the live tool drive attaches by 10 or 12 screws on the back of the machine, then the instructions can be found in the service manual for a Puma 240M that is posted in the other thread for service manuals.
If it is a front mount, use the instructions from the Puma2100/2600 manual in the same thread.

[Don18P]

Thanks again Darryl, she's back running!
You are the best!