I'm using WinCNC with G-code and I have a question.
I have a lot of production files that make many copies of something by using the L10 command, as in:(stuff to do first, like turn on the spindle, is here)
L10 R10 C5 X4.250 Y2.175 E0 (MATRIX 10 X 5)
(file content is here)
L10
(stuff to do at the end, like turning off the spindle, is here)
In the example above, there are 50 copies (10 rows, 5 columns). Is there a way I can tell WinCNC to start at the 5th position of the 7th row?
I need this because sometimes something goes wrong, and I have to stop the machine. I'd prefer to restart at the copy before the problem and then continue from there. Possible?
Many thanks,
Jim