I've done quite a bit of searching and can't find exactly what I'm looking for.
This is for an Okuma MA400HA mill with OSP-E100M OS.
We are having issues with operators running parts more than once resulting in oversized bores. During the CNC Process we have a mill path that is farily long and non interrupted where I could check spindle load. Typically during this toolpath the spindle averages 15% load. So, if possible, I want to put a check in the middle of this path that would alarm out if the load is less than 10% (such as a dry run or running a part that has already been machined).
Any ideas?