Hi Folks,
I have a current license for GeoMagic Design, a manual sherline, a new plasma cutter, and a junk box full of steppers, geko drivers, etc...
The sherline is going to be retrofitted with steppers and the cutter is getting a small format xy table.
I need suggestions for:
1. A CAM tool. Open source is my first choice but something that costs a few hundred would be fine. This is hobby stuff and I can't justify another $500 a year software fee... I'm learning Python; is pycam a usable tool?
2. A controller that would work for both applications. I'm looking at GRBL and TinyG but am interested in hearing other suggestions. I'd like to use the same board so I have one less learning curve. They have integrated drivers, and that is ok, but I actually prefer to use separate drivers.
Thanks in advance for the help!
Regards,
SailBum