[cruizer67]

We have a guy installing the Predator software for DNC in our shop we have all the machines working except for the Superslant. We are able to punch out a program and capture it with the DNC. How ever we are not able to send a program to the machine from the DNC, Just wondering if there is anyone who can give some direction on how to set up the machine correctly (baud device etc etc) we have the manuals but sometimes they are a bit hard to understand as well as changing parameters is a little frightening. Also how can I dump parameters from the machine to the DNC ?
Any help in the area would be greatly appreciated, we are half a machine away from having all the machines working properly on the DNC

[Spiker604]

We used to use UP6/DN8 program to upload/download from our machines. To output the parameters we just went to the parameter page and typed (output soft key) O-9999 and pushed the output/start hard key. Just the reverse for inputting, (input soft key) then push output/start hard key

[cruizer67]

Solved the problem. Bought a new machine !! Thanks for your input


Sent from my iPhone using Tapatalk

[Spiker604]

Solved the problem. Bought a new machine !! Thanks for your input


Sent from my iPhone using Tapatalk

No problem !! Great you were able to get a new machine !! If you ever need help in the future just let me know. If you are ever looking to get rid of any kind of control parts, let me know, I could always use spare supplies to help people out when I can !