Hi,
I am looking for a maintenance manual for a Hitachi Seiki VA-65 with Fanuc 6M Control.
There are a number of things I am trying to work out & the manual I have is clearly for another machine (although the first 40 pages are missing) it's talking about a 10T control not 6M.
The machine alarm light is on, and I believe this is stopping me starting the spindle or M19'ing it.
When I search the 28 errors on the machine control panel, (Micon8) I have two bits showing as 1's under B, but my maintenance manual totally contradicts my user manual on all other bits & typically has B missing :/
(In the spirit of full disclosure I am also getting an intermittent 436 Z servo alarm on the Fanuc CP, which comes on if it's in a bad mood or if I rapid too quickly. I believe this to be a bad wire/connection & will strip & check the plugs tomorrow) When that error isn't on, all three axis jog & home fine, but MDI doesn't accept anything & the spindle won't start.
Thanks
Nick