586,113 active members*
3,259 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > ACE V400 spindle position to high for tool change

Thread: ACE V400 spindle position to high for tool change

Results 1 to 4 of 4
  1. 04-12-2016, 09:12 PM #1
    Luke-H
    Luke-H is offline Registered
    Join Date
    Feb 2016
    Posts
    5

    ACE V400 spindle position to high for tool change

    Hi all,

    I'm currently working on a ace v400 twin pallet machine which has recently been moved from building to another and the problem i have is the spindle is to high for the automatic tool change i was wondering how i could go about lowering it to the correct position.

    Thanks in advance
    Reply With Quote Reply With Quote
  2. 04-13-2016, 02:10 PM #2
    ifixcnc
    ifixcnc is offline Registered
    Send a message via Yahoo to ifixcnc
    Join Date
    Jun 2004
    Posts
    511

    Re: ACE V400 spindle position to high for tool change

    It sounds like your axis reference, or 2nd reference is off. The manual should tell you how to reset that.
    Reply With Quote Reply With Quote
  3. 04-27-2016, 09:37 PM #3
    Luke-H
    Luke-H is offline Registered
    Join Date
    Feb 2016
    Posts
    5

    Re: ACE V400 spindle position to high for tool change

    thanks for the reply i have got the position right now but it will only work when i turn it on holding p + can if i dont do that it alarms out with a z axis overtravel alarm
    Reply With Quote Reply With Quote
  4. 04-28-2016, 07:18 PM #4
    ifixcnc
    ifixcnc is offline Registered
    Send a message via Yahoo to ifixcnc
    Join Date
    Jun 2004
    Posts
    511

    Re: ACE V400 spindle position to high for tool change

    Sounds like your stored stroke limits are off.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fanuc 0i-MC How to force waiting tool pot move to tool change position
    By GiangTheTool in forum Fanuc
    Replies: 2
    Last Post: 12-31-2014, 01:46 PM
  2. Hardinge Spindle lost tool change position
    By Ph2011 in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 05-02-2014, 04:43 PM
  3. How to change Tool change position(About MAZATROL T1 control)
    By liushuixingyun in forum Mazak, Mitsubishi, Mazatrol
    Replies: 6
    Last Post: 01-07-2014, 01:33 AM
  4. Setting tool offsets and tool change position.
    By trishbits in forum CamBam
    Replies: 1
    Last Post: 02-08-2013, 12:18 AM
  5. Arrow 500 spindle tool change position
    By mmckell in forum Cincinnati CNC
    Replies: 7
    Last Post: 02-15-2011, 09:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules