Re: SkyFireCNC
Originally Posted by
handlewanker
If I need a large G code sequence for a complicated work piece there is no way I'd hand write it......that would suggest a bought in program or a probed one.....
Or you could do what EVERYONE! else does, and get CAD/CAM software.
News flash: probably less than 0.01% of cnc routines come from probing.
95% of cnc routines comes from CAD/CAM (or from on-machine conversational type programming, but that is a topic for another day).
g-code knowledge is necessary so you can understand what the CAM spits out.
Tim
Tormach 1100-3, Grizzly G0709 lathe, Clausing 8520 mill, SolidWorks, HSMWorks.