hey all. was asked to make this for a customor/
i have knowlege in rhino and grasshopper. anyone has any idea of how to get into that?
thanks!
hey all. was asked to make this for a customor/
i have knowlege in rhino and grasshopper. anyone has any idea of how to get into that?
thanks!
Buy it from the people that manufacturer it and add 25% to the price for your customer.
Someone wants you to make it because they don't want to pay what it costs.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
well, i like to know how i can get along by myself. ive made somthing simular:
but in what i did was alot of angles, in what ive seen the structure is simullar , but in what he showed me there is something looks like paper and im not sure how i can do this.
anyone got a clue?
btw, what ia mde was made with rhino+grasshopper
You can use Rhino's Heightfield function on that gray-scale photo to get a low relief and then carve it on a CNC router. But if you can just buy these panels, that would probably be easier and cheaper, and wouldn't violate anyone's Intellectual Property rights.
Hi!
Could you tell me how you solved the issue? I'd make it with NURBS, if I had 3D scan data, or with T-Splines, if there was no need to replicate the surface precisely. Rhino could help in the both cases (at the moment I have no examples, but I'll add them over time) or some other T-Spline software like Fusion 360. If you did it without scanning, it should have taken a lot of time)