[Kevin77]

Anyone have one that works?

I lost mine due to a computer failure. The included one seems to do nothing but create errors at the control.

I contacted dolphin to see if they could resend the one they had made for me, but they stated they were very busy and I was far back in line. No idea how long it would take to resend my post. They did offer me a bangin' deal on upgrading to V14, and even offered to bump me to the head of the line if I bought it.

Seems like a funky way to treat customers. Any of you dolphin guys checked out other SW packages?

Thanks!

Kevin

[Kevin77]

So, it's been 3 weeks now and still no reply from Dolphin. Anyone know someone good there to contact? Andre?

Thanks, guys.

[andre-dolphin]

Hello Kevin,

My apologies, I thought this had been taken care of.

I have attached a zip file that contains all the Dynapath posts I can find.

See below for installation notes..

IMPORTING POSTS

Having received a new or modified post processor, you will need to import it.

To do this double click the PartMaster Post Processor icon from your desktop, from the top toolbar choose Import
and browse to the folder where the modified post processor was saved.

When the file has been imported you will see the contents in the display area, next choose Compile from the top toolbar to create the .ppx file.

The new post-processor is now ready for use. Close the post-processor by using File > Exit.

When you next run DCAM or DWES the post processor will appear in the drop down list along with all original posts.



ATB
Andre

[Kevin77]

Andre,

Thanks so much. I'm looking through to see what I can get to work.

Kevin