[texano]

Hi,
I need advice to buy laser engraving cut Machine

Budget $2000/3000

non metal cut
the machine need work around 3 hours a week
engraving and cut various material like acrylic, double color abs .....
Thickness (min 3mm) not more than 15mm, if less not problem
Working Area: 400*600 or more


I know, need more info for give advice but with the budget no many choices
Thanks

[wklaserliu]

Hi,
I need advice to buy laser engraving cut Machine

Budget $2000/3000

non metal cut
the machine need work around 3 hours a week
engraving and cut various material like acrylic, double color abs .....
Thickness (min 3mm) not more than 15mm, if less not problem
Working Area: 400*600 or more


I know, need more info for give advice but with the budget no many choices
Thanks

Hi Texano,

Dear i am Quiven form gweike laser,
for your news 600*400mm laser cutter engraver for cutting acrylic,double color board etc form 3mm to 15mm then i recommend oyu our laser cutter LG6040N (600*400mm) or storm600(600*400mm) laser cutter,
below is the two machines link:http://www.wklaser.com/index.php?m=c...128&l=2&id=249
http://www.wklaser.com/index.php?m=c...128&l=2&id=254

after you check can you give news ?

storm600 and LG6040N price all below 3000$ .

ok, for more news you cna contact at :
skype:wkquiven
[email protected]

[Downunder35m]

Where is the advise? I only see advertising...

[texano]

I totally agree with you

Thanks Downunder35m

[texano]

Dear wklaserliu,
I know that, I can find your product at these prices, and even better,
if I go to alibaba find millions of spectacular laser machines.
the difficult is understand wich one works fine and that matches the real characteristics.
I had already in the past experience with other company in china, some positive and some negative.
If your product is great, do you have some customer in australia,in particolar in Sydney,
which I can test your machine and give a good evaluation?
and naturally buy

[wmgeorge]

I had a Storm machine and was very happy with it.

[abyss]

i am Quiven form gweike laser,
for your news 600*400mm laser cutter engraver for cutting acrylic,double color board etc form 3mm to 15mm then i recommend oyu our laser cutter LG6040N or storm600

Quiven, can your LG6040N or storm600 CUT (I exactly mean cut - not engrave!) 14mm acrylic with one pass?

[wmgeorge]

Quiven, can your LG6040N or storm600 CUT (I exactly mean cut - not engrave!) 14mm acrylic with one pass?

You need a lot more than 50 watts to cut acrylic 14mm thick, in one pass.

[wklaserliu]

Quiven, can your LG6040N or storm600 CUT (I exactly mean cut - not engrave!) 14mm acrylic with one pass?

Hi Abyss,

dear LG6040N with 100w RECI tube ,chiller CW5000 ,etc can cut 14mm acrylic one pass of cource.

dear for more news of price etc you can add my skype； wkquiven
[email protected]

Quiven

- - - Updated - - -

Quiven, can your LG6040N or storm600 CUT (I exactly mean cut - not engrave!) 14mm acrylic with one pass?

Hi Abyss,

dear LG6040N with 100w RECI tube ,chiller CW5000 ,etc can cut 14mm acrylic one pass of cource.

dear for more news of price etc you can add my skype； wkquiven
[email protected]

Quiven

[wklaserliu]

Dear wklaserliu,
I know that, I can find your product at these prices, and even better,
if I go to alibaba find millions of spectacular laser machines.
the difficult is understand wich one works fine and that matches the real characteristics.
I had already in the past experience with other company in china, some positive and some negative.
If your product is great, do you have some customer in australia,in particolar in Sydney,
which I can test your machine and give a good evaluation?
and naturally buy

HI Texano,

YES, you cna find millions on alibaba, but who is real manufactuer ,who is trade company and pick machines then sell , all this i think you can not make clear only thorugh alibaba.

i have customer in your country and Sydney city . if you like conatct then contact me at skype:wkquiven
[email protected]
Attachment 320440Attachment 320442

[texano]

HI Texano,

YES, you cna find millions on alibaba, but who is real manufactuer ,who is trade company and pick machines then sell , all this i think you can not make clear only thorugh alibaba.

i have customer in your country and Sydney city . if you like conatct then contact me at skype:wkquiven
[email protected]

ok I will be happy to talk to you

[lasermornone201]

Hi,Texano.
I write a article of "Buy a laser cuter from China or Local." just now.And I wirtie several factors to choose a suitable laser cutter.Please check this link:
Buy laser cutter from China or Local?

Hope that can help you.